<P>For the use of keel laying solid wood flooring local water treatment, you can clean the surface of the water, the soaked floor of the water pry up,fencing cost per linear foot and redwood placed in the ventilation at the dry. In order to make the water dry faster and more thoroughly, it is best to lay along the direction of the keel will also pry the opposite floor, to achieve the circulation of air under the floor, thus taking away the water vapor.</P>
<P>For most of the local water treatment of the floor, first of all need to dry the surface of the water as soon as possible, and then take the vacuum cleaner at the splash of the bubble floor of the floor,synthetic marine flooring australia sucking water vapor.</P>
<P>Vacuum cleaner suction water vapor method: For most of the local water treatment of the floor, first of all need to dry the surface of the water as soon as possible,polycarbonate wooden support design and then take the vacuum cleaner at the splashing of the floor of the bubble floor, sucking water vapor.</P>
<P>Hair dryer blowing method: If the wood floor soaked less, you can also use the hair dryer blowing in the gap until dry. But do not use hot air blowing,synthetic wood plastic wall panel but slowly dry with cold air to prevent the surface dry and too dry and produce dry deformation.</P>