<p>polished (glue putty); 4, full Guanizi; 5, full scraping second times putty; 6, polished to remove dust; 7, the first time brushing primer; 8, rehabilitation 9, putty; grinding to remove dust; 10, brushing second times primer; 11, Polish wipe; 12, 13, net besmear brushs; Mo Guangca; 14, finish brushing second times. Note: (1) the putty is not too thick; (2) primer concentration is moderate; (3) primer and finish to complete; (4) the wet not brushing primer topcoat; (5) </p>
<p>paint, painting shop, polished smooth, no bright spot; (6) spraying, no sand marks. Main material: latex, bottom Po, gypsum powder, mixing paint, talcum powder, cooked powder. First steps of mixing oil: first cleaning the dust and dirt on the wooden surface. The second step: with pig blood ash plus double fly powder, mix the whole batch of wood surface. The third step: after the dry polishing with sandpaper. The fourth step: brush the first paint. The fifth step: </p>
<p>Dianbu bad at. The sixth step: after the dry polishing with sandpaper. The seventh step: Brush second times paint. The eighth step: after the dry polishing with sandpaper. The ninth step: Brush third times paint. In general, blending oil between 2 and 3 times is advisable. Brush flow (1) cleaning, sanding, paint knot point operation (2) brush oil base (3) local Guanizi, polish (4) full Guanizi, polished (5) brush shellac liquid (6) side brush primer (7) mixing after filling </p>
<p>stair stringer spacing composite<br />
composite substitutes for plywood<br />
waterproof t and g composite decking</p>