<p>The general order of floor installations is to install the floor first and then install the door. If you need to install the door first, you have to reserve the height of the groundhow long should a wooden stakade fence last in advance. The calculation method is: floor thickness + 2.5 mm floor thickness + buckle thickness (depending on the material). When installing the skirting board, be careful not to make the mouth flush, but also be careful that the gap between the baseboard and the floor does not exceed 1 mm. </p> <p>If fixed with nails, the spacing between nails and nails must not exceed 40 cm. If the room is a geothermal floor, the geothermal heat must be fence installation breakdown calculator turned on several weeks before the floor is installed to open the windows for ventilation and emit moisture.</p> <p> If the surface temperature of any geothermal floor continues to exceed 27 degrees, the damage to the floor is destructive. It is recommended that after the first installation of the floor, the floor be maintained two days before the furniture is placed. Do not buy poor quality skin care products that are sent by Composite Wood Exterior Paneling strangers to the door to avoid unnecessary economic losses. </p>